Calculating your car’s mileage per litre is a straightforward process that can be done using two common methods: Whereas the Full Tank Method fixes the amount of money that the consumer is ready to spend on fuel from a full tank up to the tank being empty, the Trip Meter Method takes the fuel consumed to reach a given destination and the balance of the tank from that destination up to being empty. Here’s a step-by-step guide for each method:Here’s a step-by-step guide for each method. Both methods are valid if the steps are followed correctly, although the second method is more accurate when recording distances and the first is more suitable for longer distances such as from one country to another. **How to calculate car mileage per litre** of a car in India,

## Here’s a step-by-step guide for each method:

## Method 1: To sum up,

Full Tank Method is a unique way of presenting ideas and engaging an audience, which is based on the approach of using one’s full tank of gas in order not to run out of ideas when people are still listening.

### 1. Fill the Fuel Tank

The idea is to start with full capacity, so, gas up to the brim of your car’s fuel tank.

Also, write the current number of kilometres shown on the car odometer at the beginning of the process (e. g. 10,000).

### 2. Drive Your Car

You simply drive your **car mileage calculator**** **as any other vehicle and get it refuelled as you would with any other car. To get the most accurate average mpg value, it might be wise to calculate it when driving both in city traffic and on high-way.

### 3. Refill the Tank

Once the car covers a considerable distance- in the region of 200-300 kilometres or more -, it will be necessary to top up the fuel tank.

Record the period of time it takes to refill any fuel that had been used in the car (for instance, 25 litres).

Notice down to the last digit the distance travelled, indicated on the odometer (for instance, 10,350 km).

### 4. Calculate the Mileage

Distance Travelled: The total distance when tested can be **mileage calculator indi****a** from the new and initial odometer readings; simply subtract the two.

**Example:** The distance was 10,350 km and was reduced to 10,000 km, and therefore, the reduction was 350 km.

Fuel Used: Fuel consumed is the quantity that is used to fill the tank while fuel economy is the distance covered with the fuel used.

**Example: 25 litres**

Mileage: Take the difference between the fuels before and after the journey and divide it by the distance covered.

The above equation is used to calculate the mileage and **how to calculate mileage per km** on a vehicle whereby, the mileage is expressed in kilometre per litre of fuel used while the distance travelled and the fuel used are measured in kilometre and litre respectively. \text{Mileage (km/l)} = \frac{\text{Distance Travelled (km)}}{\text{Fuel Used (litres)}}Mileage (km/l)=Fuel Used (litres)Distance Travelled (

**Example**:

Mileage=350 km, 25 litres=14 km/l\text{Mileage} = \frac{350 \text{ km}}{25 \text{ litres}} = 14 \text{ km/l}Mileage=25 litres, 350 km=14 km/*Mileage}/\text{\# litres} \updownarrow 350 \text{ km} = 14 \text{ km*M

## Method 2: Trip Metre Method

### 1. Reset the Trip Metre

Take a piece of advice as a car owner, whenever you intend to refuel, always ensure that your car trip metre is set to zero.

### 2. Drive Your Car

To perform the tasks, drive your car in accordance with normal practices by engaging the accelerator pedal to gain speed.

### 3. Refill the Tank

After sometime, you should go back to the fuel station and try and determine the amount of fuel that the tank is holding at this stage – for instance, thirty litres.

It should be noted the reading on the trip meter before the start of a trip, for example, 400km.

### 4. Calculate the Mileage

## Use the same formula as above:Use the same formula as above:

Main section: This formula shows how to calculate the distance travelled in kilometres for each litre of fuel used The formula displayed below explains how to calculate the fuel consumption per kilometre: \text{Mileage (km/l)} = \frac{\text{Distance Travelled (km)}}{\text{Fuel Used (litres)}}Mileage (km/l) = Distance Travelled, km / Fuel Used Litres

**Example:**

Mileage=400 km30 litres=13. Diesel engine cars 33 km/lMileage = \(\frac{400 km}{30 litres}\) = 13 They are 33 km/l or 30 litres for a 400 km range or 13 litres on a per mile basis. 33 km/l

With these steps, you will be able to know your car’s MPG and that will assist you definitely on how to decide on the amount of fuel you should use.

Also Read – **How to Give My Car to Rent for Government Employees?**

Mera Name Jay Kumar Hai , **Best Bikes Cars** Mera** Blog** Hai, Mujhe Autombile Par Content Likhna Pasand Hai, Mai Apko Automobile Ki Information Deta Rahunga Aap Mera Blog Padhte Rahe.