Air intakes are a tried and tested way to raise the performance bar of your truck. It increases air flow to improve performance. But finding the ideal air intake for you can be difficult if you are not an expert. There are many different types of air intakes available in the market. Unfortunately, not every intake will live up to its potential. Top 7 Cold Air Intake for 5.9L Cummins are discussed in this post.
Today, internal combustion is the basis of all engines, whether in a ship, a scooter, or any other type of large machinery. The cylinder or chamber of an internal combustion engine where power is produced.
Previous external combustion variations, in which power was produced externally, are not quite like this. In that kind of engine, the fuel must burn out in order to convert the water into a stem. The high pressure from the steam generated the force needed to drive the piston. Internal combustion engines, on the other hand, use a combination of a volatile fuel such as gasoline or diesel and air to directly perform the same operation. This implies that two components, namely air/oxygen and fuel, are necessary. But you can’t expect this to happen just by throwing oxygen and fuel together.
Best Cold Air Intake for 5.9L Cummins (Reviews & Buying Guide)
A specific air intake system is required to carry out the complete combustion process. The system will have tubes and valves to route the oxygen and fuel into the cylinders. The mixture would then be compressed by a piston before being subsequently ignited by the ignition system. The air intake system is very essential for engine operation, as it collects air and then distributes it to certain cylinders. The cold air intake tube is located in the air intake system so that it can draw air in from outside. As a result, it can be found closer to the fenders, grille or hood scoop. We can assume that air travels right through the entire system through a cold air intake tube. This is the only entrance that allows air to enter
#1. S&B Filters 75-5094D Cold Air Intake
The S&B Filter Cold Air Intake System is an excellent air intake system that will greatly improve the performance of your truck. It will also improve your truck’s turbo and throttle responsiveness, allowing you to more readily feel the available power. And when used in conjunction with various engine tuners, this method gets even better.
It’s very easy to set up, maintain and run, and it’s easy to check the filter to make sure it’s still working properly. This expands the surface area of the filter and protects it from a variety of particles. It is a perfect fit and will last you a very long period of time on your truck.
Cold air intake for the 5.9L Cummins with S&B filter, not much to complain about. An excellent air intake system that will enhance the many functional features of your truck is the S&B Filters cold air intake system. Whenever you are installing it, keep in mind that the air pipe is located very close to the exhaust.
- Provides 42 percent more airflow
- Has oiled and dry filter options
- Is 99.51-percent efficient
- Uses premium silicone parts
- Has a custom heat shield
- Designed to avoid check engine light
K&N 57-1532 High Performance Cold Air Intake Kit
The K&N 57-1532 is an excellent system from a reputable manufacturer. It has a large conical filter and a high density polyethylene tube.
This dyno-tested cold air intake is guaranteed to boost horsepower by offering up to 50% more air flow than the factory-installed original system. Crosslink nylon intake tubes improve engine performance by keeping intake air temperatures lower than metal tubes.
The 57-1532 CAI installs in under an hour using only common hand tools. And it requires no maintenance for up to 100,000 miles. You can be sure that a K&N product will look beautiful and perform well on your vehicle if it is the Official Air Filter of NASCAR.
- The 10-Year/Million Mile Limited Warranty offers protection for the entire life of your car.
- GUARANTEED POWER IMPROVEMENT: Up to 50% greater airflow than the constrictive stock box air filter and intake tube were dyno-tested.
- BETTER TOWING: By enhancing throttle response, towing results in better acceleration and uphill performance.
- Improved engine sound lets you hear the force at work.
- Pushing the boundaries of engine safety by shielding your engine from damaging pollutants.
- EASY MAINTENANCE: For up to 100,000 kilometers, filter cleaning is not necessary.
- EASY TO INSTALL: Use common hand tools to bolt on power in less than an hour.
#3. Spectre High Performance Air Intake Kit
Another business that has been in operation for over 30 years is Specter Performance. Nevertheless, they continue to focus on intake systems and air. As a result, you shouldn’t be concerned about them making poor design decisions. Still, this is unquestionably the least expensive cool air intake. Design-wise, there are a lot of areas in the Specter performance that could be strengthened. However, you won’t find a better cold air intake than the Specter Performance for the money.
What sets the material apart from other options is the Specter Performance cold air intake. But this can cause problems for other components. For example, powder coated stainless steel is used to make the heat shield. And this 5.9 Cummins cold air intake guarantees it’s strong and naturally water-resistant. On top of that, he used polished metal to make the tube. Still, aluminum has a tendency to heat up more quickly than plastic
- Boost the efficiency of the cold air intake system in your automobile.
- Increase force and speed while keeping the engine of the car safe.
- Anodized aluminum pipes provide additional durability by resisting wear.
- Installing air intakes requires no special tools and is fairly simple.
- NOTICE: Please enter the model of your vehicle in “Your Garage” to check if it fits.
#4. aFe Stage 2 Pro-5R Cold Air Intake System
One of the best cold air intake systems on the market is the aFe Stage 2. This not only makes your 5.9L turbo engine scream with power but also gives it more power. The device reportedly increases airflow by up to 105% and is made entirely of high-temperature silicone connections. The engine is well protected from harmful pollutants due to the filter’s 98.6% efficiency rating.
One of the most recent businesses on our list, aFe, has just celebrated its 20th anniversary since being founded in 1999. The firm manufactures a wide variety of aftermarket kits and parts. Thereby designed each and every item of yours to increase the efficiency and power of your car.
But aFe focuses on a very different market. The firm manufactures a wide variety of aftermarket kits and parts. Like for example, the addition of a cold air intake will add a healthy 14 hp and it also adds an extra 27 pound-feet of torque. AFE Stage 2 delivers a power advantage that is unmatched by any other intake we’ve tested.
- Can increase power by 14 HP
- Can add 27 lbs of torque
- Increases airflow 105-percent
- Has high-temp silicone couplings
- It has a solid heat shield
- Has a Pro 5R filter
#5. Banks 42225 RAM Air intake System
Banks Power is a subsidiary brand rather than its own business. Alone with less emphasis than other on-air and intake items, this is the newest firm. The heavy cost of self-awareness serves as an example. So there’s no need to worry about replacing it any time soon. This helps protect the air temperature from the heat of your engine while protecting the filter. It only makes sense, given their location in California.
- Your engine can draw extra cold air with the aid of the air intake kit, which will improve throttle response and increase the engine’s bursty horsepower output.
- All necessary mounting hardware, vacuum hoses, and reducers will be provided.
- After purchasing this kit, no extra components will be required for installation.
- High-quality, washable, and reusable air filter
By allowing cooler, denser air into the engine, you improve combustion. This results in less fuel wastage, and most importantly, your truck will perform more closely to its ideal specifications. When combined with other aftermarket items, and requires less time than other modifications. Before we let you make your pick, it should be clarified that if your truck already has a lot of enhancements installed, it makes sense to ask the manufacturer about a suitable product.