UAE valves is a leading Cryogenic Valve supplier in Dubai, it is a specially designed valve used to control the current of cryogenic fluids -usually fluids and gases at extremely low temperatures below -150 ° C (-238 ° F). These include substances such as liquid oxygen, liquid nitrogen (linen), liquidized natural gas (LNG) and others that are in an equation state at very low temperatures. In such systems, cryogenic valves play an important role when the system requires temperature control to handle cryogenic fluids properly.
The types of cryogenic valve Cryogenic Ball Valve
Cryogenic Butterfly Valve Cryogenic Gate Valve Cryogenic Globe Valve
Cryogenic Long Stem Globe Valve Cryogenic Trunnion Ball Valve
Cryogenic valve design involves the choice of materials and properties to make sealing possibilities resistant to excessive cold without being lost or crispy. General valves are ineffective for cryogenic use because they are not manufactured to withstand stress and deformation from such low temperatures. Usually, special sealing materials in the cryogenic valve are in combination with strong design aspects to maintain integrity at the low temperatures with stainless steel and other alloys.
Cryogenic Relief Valve:
A cryogenic relief valve is a specific type of pressure relief valve designed for high pressure performance in the cryogenic system. The principle of a cryogenic relief valve is to protect the tank from conditions which occur due to pressure containers, pipelines and temperature in temperature rapid, suffocation or other rapid conditions in the cryogenic system. Cryogenic fluid is kept under pressure so that they are in the fluid phase. If the temperature goes high or any other condition that will raise the pressure to a point above the safety limit, then the relief valve opens up to allow excess pressure to leak out and prevent the potential for catastrophic failure.
Cryogenic relief valves are designed to overcome peculiar challenges of cryogenic systems. These requirements include that the material be flexible enough and maintain the sealing properties at very low temperatures. Cryogenic relief valves are usually designed to include insulation, unique seals and heavy fee valve bodies, providing effective performance in high pressure, low temperature applications.
Cryogenic vs. Non-Cryogenic Valves:
The most fundamental differences between cryogenic and non-cryogenic valves are related to materials, design functions and their resistance to exaggerated temperatures. Let’s see these distinctions a little deeper:
1. Material Selection:
– The Cryogenic valves: These are made of materials that maintain their strength, flexibility and sealing capacity at low temperatures. Some of these materials include stainless steel, bronze and special alloys that avoid crispness and other low temperature problems.
-Non-Cryogenic Valve: These valves use materials that do not need to abstain from extremely low temperatures. They usually use carbon steel, raw iron or brass. These are the ones that easily become brittle or deformed in low temperatures.
2. Design Considerations:
– Cryogenic Valves: Cryogenic valves include additional care to the seal system and insulation. That means leakage or freezing could be a compromising effect on the operation of the valve. Long-stemmed and long bonnetted valves often typify this type to completely isolate the valve from a low temperature.
– Non-Cryogenic Valves: The above requirements do not apply to non-cryogenic valves as these are operating at much higher temperatures; thus, normal valve designs can be utilized for them.
3. Pressure and temperature handling:
– Cryogenic valves: These valves are specially designed to handle high pressure in the low temperature of cryogenic fluid and high pressure in the cryogenic storage systems. The material and sealing system are selected so that the valve is effectively operated at a much lower temperature than the freezing temperature.
– Non-Cryogenic Valves: These are used in systems where such extreme temperature and pressure conditions are not involved. These valves are more versatile in terms of the range of temperatures in which they can operate but are incapable of performing in cryogenic environments.
4. Functionality:
– Cryogenic valves shall be designed with a vacuum seal to retain a low-temperature so there is no gas or liquid leakage, posing dangerous situations. The valve would perform smoothly if it contained its fluids at nitrogen levels as well, though that froze and made the possibility for hazardous ones occur to freeze and clog, also damage the system.
– Non-Cryogenic Valves: Although not cryogenic, noncryogenic valves are a must for fluid and gas flow. Yet they are not much about sealing and design in extreme cold conditions like cryogenics; hence more apt for use in most of the industries that do not demand the temperature regulation in its working.
In summary, cryogenic valves are specifically designed to address the unique challenges of extreme low temperatures and high pressures associated with cryogenic systems. The materials and design features ensure safe, reliable performance under such severe conditions. The non-cryogenic valve is designed for standard operating conditions where excessive temperature is not a factor. Such differences must be understood in the selection of valves for systems that contain cryogenic liquids or gases.
We are one of those companies that manufacture high-quality cryogenic valves and it is highly recommended Cryogenic Valve supplier in Dubai. Whatever it is, cryogenic or non-cryogenic, offers durable, assured valves to match the stringent needs of industries.
Description:
●Available materials: SS304, SS316, CF8M, CF8, F51, F55, F53, WCB, WC6, WCC, LCB, LCC
●Class: 150 to 800
●Nominal Pressure: PN25 to PN100
●Size: 1/2” to 24”
●Ends- Flanged, Threaded, Socket weld, Butt weld, Lug, Wafer
●Operations: Lever Operated, Hand wheel operated, Electric Actuated and Pneumatic ActuatedVisit us: https://www.uaevalves.com/product-category/cryogenic-valve/