If you are not happy with the existing speaker or want to buy a new speaker for your car, it is very essential to buy a car speaker which can perfectly fit in your car. For making, it is easy for you, we are going to discuss How to Measure Car Speaker Size?
Things you will need
You will need a measuring tape,
- Panel removing tools
- Notepad, and
- Pen or pencil
How to Measure Car Speaker Size?
You can follow the following steps to measure the speaker size of your car.
- Remove the panel in case the speaker is located at the door panel
If the speaker is located at the door panel, you should remove the panel from the car’s door. If you want to measure the speaker size of the rear or front speaker, then it’s not required. Now, after you unscrew the speaker. Place it on a flat surface.
- Measure the mounting depth of the speaker
Now, you need a measuring tape. Take it and first measure car speaker mounting depth. Note down the length between the mounting plane and the end of the magnet area of the car’s speaker.
- Measure the height of the speaker
Now, the next step is measuring the height of the car’s speaker. Keeping the tape at the center. Hold the one end of the speaker to the one end of the speaker and move it to another end. Doing this will help you select
the speaker which will fit the mounting depression closely. This step is very essential for the selection of the right speaker.
- Measure the distance between screw holes
Now, you should measure the distance between screw holes. However, this step is not necessary if you want to use a different type of screw, you can skip the step. It will help the installation process of the speaker easily and hassle-free. Measuring the distance between screw holes will make sure that you will not need to drill new holes for installation.
While buying a new speaker for your car, it is very necessary to take care of other things too like the weight of the speaker, The Type Of Screw Mounting The Speaker, The Power Rating Of Your Car Stereo,